-
-11%
Features:
- Non-Contact AC Voltage detection of AC Voltage from 50 to 600V, 50/60Hz
- Audible and visual red LED light indicator
- Convenient built-in pocket clip
- Tip fits into AC outlets or against wire insulation testing
- Complete with two AAA batteries
DV23: Non-Contact Voltage Detector
Original price was: ₦5,600.00.₦5,000.00Current price is: ₦5,000.00. -
-4%
Features:
- Non-contact detection of AC Voltage in 2 ranges:
- 24 to 1000VAC
- 100 to 1000VAC
- For use on 50/60Hz circuits
- Audible and Visual voltage indication
- Built-in bright flashlight with On/Off button
- Rugged double-molded housing
- Tip fits into outlets or against wire insulation testing.
DV25: Dual-Range AC Voltage Detector with Flashlight
Original price was: ₦7,000.00.₦6,700.00Current price is: ₦6,700.00. - Non-contact detection of AC Voltage in 2 ranges:
-
-4%
Features:
- Non-Contact detection of AC Voltage from 12VAC to 600VAC
- Sensitivity adjustment increases or reduces sensor trigger threshold
- Audible and visible voltage indication
- Self test function
DV30: Non-Contact Adjustable AC Voltage Detector
Original price was: ₦7,000.00.₦6,700.00Current price is: ₦6,700.00. -
-16%
Feature:
- Compatible with CLT600 Advanced Cable Locator and Tracer Kit
CLT-ADP-US: Socket Adapter with North American 3-pin Type B Plug
Original price was: ₦13,650.00.₦11,500.00Current price is: ₦11,500.00. -
-16%
Feature:
- Compatible with CLT600 Advanced Cable Locator and Tracer Kit
CLT-ADP-EU: Socket Adapter with European 2-pin Type C Plug
Original price was: ₦13,650.00.₦11,500.00Current price is: ₦11,500.00. -
-16%
Feature:
- Compatible with CLT600 Advanced Cable Locator and Tracer Kit
CLT-ADP-UK: Socket Adapter with UK 3-pin Type G Plug
Original price was: ₦13,650.00.₦11,500.00Current price is: ₦11,500.00. -
-18%
DAT12: Bluetooth Datalogging Module
Original price was: ₦18,800.00.₦15,500.00Current price is: ₦15,500.00. -
-13%
Features:
- Rechargeable
- 3.7V Lithium Ion
- 1400mAh
BATT-37V: 3.7V Li-Ion Rechargeable Battery
Original price was: ₦19,500.00.₦17,000.00Current price is: ₦17,000.00. -
-15%
Features:
- The only two-in-one current/voltage detector designed for electrical testing
- Non-Contact AC Voltage detection from 12V to 600VAC
- Non-Contact AC Current detection from 200mA to 1000A
- Sensitivity adjustments to increase or reduce sensor trigger threshold
- Current sensor detects current flow through shielded wires, conduit, and metal circuit breaker/junction boxes.
DVA30: Non-contact AC Voltage and Current Detector
Original price was: ₦22,000.00.₦18,600.00Current price is: ₦18,600.00. -
-6%
Features:
- High temperature range: -328 to 1292°F (-200 to 700°C)
- 70.8″ (1.8m) coiled cable with Type K mini connector
- 6″ (150mm) probe length; 0.126″ (3.2mm) diameter
881605: Type K Immersion Probe (-328 to 1292°F)
Original price was: ₦23,000.00.₦21,522.00Current price is: ₦21,522.00. -
-7%
Features:
EC505: ExStik® Replacement pH Electrode/Conductivity Cell Module
Original price was: ₦30,000.00.₦27,900.00Current price is: ₦27,900.00. -
-9%
Features:
- Compatible with DO700 – 9-in-1 Portable Dissolved Oxygen Meter
DO703: Membrane Caps (3 caps)
Original price was: ₦32,500.00.₦29,600.00Current price is: ₦29,600.00. -
-15%
Features:
- Units of measure include µS/cm, mS/cm, ppm, ppt
- Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 – conveniently calculates the TDS value
- Large 3-1/2 digit (2000 count) LCD display
- Data Hold and low battery indication
- Auto Power off with disable
- Adjustable Automatic Temperature Compensation
- Simultaneous display of Conductivity or TDS plus Temperature
- Two ranges for Conductivity and TDS with one point calibration per range
- Waterproof design to withstand wet environment — meets IP65 standard
- Includes meter, protective sensor cap, and four LR44 button batteries. Conductivity standards sold separately (required for calibration).
EC150: Conductivity/TDS/Temperature Meter
Original price was: ₦36,500.00.₦30,900.00Current price is: ₦30,900.00. -
-34%
Replacement Pins for MO210/MO260/MO265 Moisture Meters
The Extech MO200-PINS are a set of Moisture Meter Replacement Pins. This product is for use with the MO210, MO260, and MO265 moisture meters and is field replaceable. It comes with fifty durable pins.
Extech MO200-PINS
Original price was: ₦52,300.00.₦34,300.00Current price is: ₦34,300.00. -
-30%
50 Replacement Pins for MO220/MO290-P
The Extech MO220-PINS is a set of 50 Replacement Pins for the MO220 Moisture Meter and MO290-P Moisture Probe. Pins have a 1 cm (0.4 in) depth.
Extech MO220-PINS
Original price was: ₦48,700.00.₦34,300.00Current price is: ₦34,300.00. -
-10%
Features:
Conductivity Cell Features
- Compatible with DO700 – 9-in-1 Portable Dissolved Oxygen Meter
- Compatible with EC600 – 7-in-1 Portable Water Conductivity Meter
For complete specs please download the product datasheet (not available for some accessories)
EC605: Conductivity Cell
Original price was: ₦42,000.00.₦38,000.00Current price is: ₦38,000.00. -
-9%
Features:
- True RMS DMM with 11 functions and 0.3% basic accuracy
- AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
- Input fuse protection and mis-connection warning
- 10A max Current
- Type K temperature measurements
- Data hold, Relative, Auto power off
- Large-digit backlit LCD
- Complete with CAT III test leads, tilt stand, protective holster, velcro hanging strap, Type K bead wire temp probe and 9V battery.
EX430A: 11 Function True RMS Professional MultiMeter
Original price was: ₦43,500.00.₦39,800.00Current price is: ₦39,800.00. -
-12%
Features:
- Compact and rugged design with high contrast large LCD display
- Manually store/recall up to 150 readings
- -58 to 1999°F (-50 to 1300°C) temperature range with 0.1°/1° resolution
- Records Max/Min/Avg readings for later recall
- Offset key used for zero function to make relative measurements
- Data Hold, Auto power off.
EA11A: EasyView™ Type K Single Input Thermometer
Original price was: ₦48,000.00.₦42,400.00Current price is: ₦42,400.00. -
-4%
Features:
- Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution
- Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
- Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 – conveniently calculates the TDS value
- Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
- Data Hold, Auto Power Off and low battery indication
- Automatic Temperature Compensation of 2% per °C
- Simultaneous display of Conductivity, TDS, or Salinity plus Temperature
- Internal memory stores up to 25 labeled readings for easy recall
- Self calibration of electronics on power up
- Order Conductivity standards separately
- Complete with meter and Conductivity cell, protective cap, sample cup, four CR2032 batteries, and 48″(1.2m) neckstrap.
EC400: ExStik® Conductivity/TDS/Salinity Meter
Original price was: ₦45,000.00.₦43,200.00Current price is: ₦43,200.00. -
-42%
10pH Buffer Solution (2 Bottles)
The Extech PH10-P are two bottles of 10 pH Buffer Solution. Comes in convenient pint size plastic bottles.
Extech PH10-P
Original price was: ₦85,300.00.₦49,700.00Current price is: ₦49,700.00. -
-37%
ExStik® Replacement pH Electrode Module
The Extech PH105 pH ExStik® Electrode Module is an easy to clean, rugged flat surface pH electrode. It is interchangeable with the ExStik® Chlorine or ORP meters and measures in liquids, semi solids and solids. Also, it has the ATC via the built-in PT-100 Ohm sensor. The Extech PH105 pH ExStik® Electrode Module comes complete with the protective connector cap.
Extech PH105
Original price was: ₦81,200.00.₦51,400.00Current price is: ₦51,400.00. -
-39%
4pH Buffer Solution (2 Bottles)
The Extech PH4-P are two bottles of 4 pH Buffer Solution. Comes in convenient pint size plastic bottles.
Extech PH4-P
Original price was: ₦85,300.00.₦51,750.00Current price is: ₦51,750.00. -
-4%
Features:
- Temperature range: -200 to 1999°F (-200 to 1360°C) with 0.1°/1° resolution
- Compact and rugged design features large backlit display
- Displays [T1 plus T2] or [T1-T2 plus T1] or [T1-T2 plus T2]
- Timer function displays elapsed time plus the time when MIN and MAX readings are taken
- Data Hold, Auto power off, low battery and overrange indication
- Records Max/Min readings for later recall
- OFFSET key used for zero function to make relative measurements
- Complete with built-in stand, protective holster, two Type K bead wire temperature probes and batteries.
EA10: EasyView™ Dual Input Thermometers
Original price was: ₦55,000.00.₦52,900.00Current price is: ₦52,900.00. -
-36%
Compact non-contact InfraRed (IR) Thermometer measures up to 1112°F (600°C) with built-in laser pointer to identify target area and improve aim. Type K input allows for high temperature measurements up to 1832°F (1000°C). Built-in temperature sensor also measures Air Temperature. Adjustable emissivity feature allows for a higher accuracy when measuring temperature on various surfaces.
Extech IR267
Original price was: ₦83,500.00.₦53,500.00Current price is: ₦53,500.00. -
-36%
7pH Buffer Solution (2 Bottles)
The Extech PH7-P are two bottles of 7 pH Buffer Solution. Comes in convenient pint size plastic bottles.
Extech PH7-P
Original price was: ₦84,400.00.₦53,600.00Current price is: ₦53,600.00. -
-5%
Features:
- True RMS DMM with 12 functions and 0.3% basic accuracy
- AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Type-K & IR Temperature, Diode/Continuity, Duty Cycle
- Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity
- Input fuse protection and mis-connection warning
- 10A max Current
- Type K temperature measurements
- Data hold, Relative, Auto power off
- Large-digit backlit LCD
- Complete with CAT III test leads, tilt stand, protective holster, velcro hanging strap, Type K bead wire temp probe and 9V battery.
EX470A: 12 Function True RMS Professional MultiMeter + InfraRed Thermometer
Original price was: ₦64,700.00.₦61,700.00Current price is: ₦61,700.00. -
-6%
Features
- Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
- Easy to set Area dimensions (ft² or m²) are stored in the meter’s internal memory for the next power on
- 20 point average for Air Flow
- 3% velocity accuracy via low friction 2.83″D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable.
AN100: CFM/CMM Mini Thermo-Anemometer
Original price was: ₦67,305.50.₦63,310.50Current price is: ₦63,310.50. -
-14%
The Extech LCR203 are SMD Component Tweezers for use with Extech’s LCR200 LCR Meter. These tweezers make it easy to test and sort simultaneously for single handed operation. Tweezers complete the circuit with components easier than separate test leads. Comes with a 6 month warranty.
Extech LCR203
Original price was: ₦74,500.00.₦64,000.00Current price is: ₦64,000.00. -
-4%
Features:
- Kit Includes:
- EX505 – Industrial grade CAT IV-600V 4000 count display waterproof drop-proof rugged multimeter with True RMS functions
- DV25 – Dual Range AC Voltage Detector (24 to 1000VAC/100 to 1000VAC) + Flashlight with Audible/ Visual indication double-molded housing and CAT IV-1000V safety rating
- TL808 – 8-Piece Professional Test Lead Kit with CAT III-1000V safety rating
- Set of double molded professional test leads
- Type K thermocouple bead probe and Type K to Banana Input Adaptor
- Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed.
EX505-K: Heavy Duty Industrial MultiMeter Kit
Original price was: ₦69,000.00.₦66,200.00Current price is: ₦66,200.00. - Kit Includes:
-
-46%
Tripak Buffer Pouches (4, 7 and 10pH plus rinse solution)
Extech PH103 are convenient, pre-measured pH calibration solutions for your meter. Included is a rinsing solution used for cleaning off the pH electrode before and after taking measurements to prevent contamination (6 pouches of pH4 solution, 6 pouches of pH7 solution, 6 pouches of pH10 solution, 2 pouches of rinse solution).
Download Oyster-1x_Data Sheet_en-US
Download PH220_Data Sheet_en-US
Extech PH103
Original price was: ₦123,400.00.₦67,000.00Current price is: ₦67,000.00. -
-10%
Features:
- Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
- 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
- Analog bargraph indicates trends
- Memory stores up to 25 labeled readings
- Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
- RENEW feature alerts user when electrode needs replacement
- Order Conductivity standards and pH buffers separately
- Complete with meter and electrode, protective cap, sample cup, four 3V CR-2032 batteries, and 48″ (1.2m) neckstrap.
EC500: Waterproof ExStik® II pH/Conductivity Meter
Original price was: ₦76,800.00.₦68,800.00Current price is: ₦68,800.00. -
-3%
Type K temperature probe with mini connector
The 881616 is a Type K Magnetic Grill Temperature Probe. For use with any meter that has a Type K connector. This grill temperature probe features a temperature range from -40 to 392°F (-40 to 200°C).
- Temperature range: -40 to 392°F (-40 to 200°C)
- Probe surface area: 1″ x 0.75″ (25.4mm x 19mm)
- 6ft (1.8m) teflon cable with strain relief
881616: Magnetized Type K Surface Probe (-40 to 392°F)
Original price was: ₦71,000.09.₦68,916.08Current price is: ₦68,916.08. -
-31%
Compact Pin Moisture Meter
The Extech MO50 is a compact pin moisture meter that can display moisture levels in wood and building materials including wall board, sheetrock, concrete, and mortar. With an audible alert that beeps faster as moisture levels increase, this compact meter is easy to use and understand. The MO50 complete with pins (installed on meter), protective cap, and 9V battery.
Extech MO50
Original price was: ₦107,500.00.₦74,200.00Current price is: ₦74,200.00. -
-6%
Features:
- Measures Air Velocity, Air Flow, Temperature (Air/Type K), Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, and Light
- Replaceable low friction ball bearing mini vane wheel to retain high accuracy
- Measure light levels in Foot-Candle (Fc) or Lux units using a precision photo diode with cosine and color correction filter
- Backlit display to view in dimly lit areas
- Data Hold and Min/Max functions
- Auto power off with disable
- Tripod mount (optional TR100 Tripod sold separately)
- Complete with wrist strap, general purpose Type K bead wire probe, and three AAA batteries.
EN510:10-in-1 Environmental Meter
Original price was: ₦84,600.00.₦79,400.00Current price is: ₦79,400.00. -
-3%
- CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with 8:1 distance to spot ratio and Laser Pointer
- Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
- Easy to set Area dimensions (ft² or m²) are stored in the meter’s internal memory for the next power on
- Resolution of 0.01m/sec
- 20 point average for Air Flow
- Large (9999 count) LCD Backlit Display
- 3% velocity accuracy via low friction 2.83″D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
- Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster
AN200: CFM/CMM Mini Thermo-Anemometer with built-in InfraRed Thermometer
Original price was: ₦82,850.00.₦80,500.00Current price is: ₦80,500.00. -
-5%
Features:
- Compact and rugged design with high contrast large LCD display
- Manually store/recall up to 150 readings
- -58 to 1999°F (-50 to 1300°C) temperature range with 0.1°/1° resolution
- Records Max/Min/Avg readings for later recall
- Offset key used for zero function to make relative measurements
- Data Hold, Auto power off.
EA11A-NIST: EasyView™ Type K Single Input Thermometer
Original price was: ₦87,000.00.₦82,300.00Current price is: ₦82,300.00. -
-4%
Features:
- Kit includes: EC500 meter, 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 cups, batteries and carrying case
- Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
- 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
- Analog bar graph indicates trends
- Memory stores up to 25 labeled readings
- Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
- RENEW feature alerts user when electrode needs replacement.
EC510: Waterproof ExStik
Original price was: ₦87,500.00.₦83,700.00Current price is: ₦83,700.00. -
-26%
Combination Pin/Pinless Moisture Meter
Take quick moisture measurements from a range of building materials using the pin or pinless (non-invasive) method with the Extech MO55. This easy-to-operate moisture meter uses display icons to indicate moisture levels as well as offers an audible alert. It’s ideal for building restoration projects and applications where moisture detection on floors, tiles, and under carpets is critical, and it’s a must-have tool for analyzing the after-effects of water leakage behind walls and in ceilings.
CE – DECLARATION OF CONFORMITY
Extech MO55
Original price was: ₦115,200.00.₦85,700.00Current price is: ₦85,700.00. -
-3%
Features:
- Direct reading of Total Chlorine provides fast and easy measurements (less than 2 minutes)
- Low detection limit down to 0.01ppm
- Unaffected by sample color or turbidity
- Memory stores, tags and recalls up to 15 readings
- US EPA approved as an acceptable method for wastewater compliance monitoring of Total Chlorine.
CL200: ExStik® Chlorine Meter
Original price was: ₦89,700.00.₦87,400.00Current price is: ₦87,400.00. -
-3%
Features:
- Includes CL200 meter, pH electrode, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
- 3-in-1 Water Quality Meter measures Chlorine, pH plus Temperature with interchangeable flat surface electrodes (included)
- Flat surface electrodes work in liquids, semi-solids and solids
- Memory stores and recalls 15 readings and saves last calibrated value
- Large 3-1/2 digit (2000 count) Digital display with bargraph
- Automatic electronic self calibration for Chlorine; 1, 2 or 3 point buffer calibration for pH
- Data Hold, Auto shut-off and low battery indication
- Simultaneous display of ppm or pH and °C/°F Temperature
- Automatic Temperature Compensation.
EX800: ExStik® 3-in-1 Chlorine, pH, Temperature Kit
Original price was: ₦91,000.00.₦88,500.00Current price is: ₦88,500.00. -
-23%
ExStik® Replacement Refillable pH Electrode Module
Replacement flat surface electrode for ExStik
Extech PH115
Original price was: ₦117,500.00.₦90,900.00Current price is: ₦90,900.00. -
-5%
Features:
- Simultaneous display of Conductivity or TDS with Temperature
- Three ranges for Conductivity and TDS plus adjustable Temperature compensation factor to maintain accuracy
- Automatic Temperature Compensation
- Temperature compensation factor adjustable between 0 to 5.0% per °C
- Min/Max and Data Hold functions
- Auto Power Off with disable feature
- Use optional 1413µS Conductivity Standard (EC-1413-P) for calibration
- Complete with Conductivity cell and 39″ (1m) cable, 9V battery, and soft case.
EC210: Compact Conductivity/TDS Meter
Original price was: ₦97,500.00.₦92,500.00Current price is: ₦92,500.00. -
-4%
Features:
- Temperature range: -200 to 1999°F (-200 to 1360°C) with 0.1°/1° resolution
- Compact and rugged design features large backlit display
- Displays [T1 plus T2] or [T1-T2 plus T1] or [T1-T2 plus T2]
- Timer function displays elapsed time plus the time when MIN and MAX readings are taken
- Data Hold, Auto power off, low battery and overrange indication
- Records Max/Min readings for later recall
- OFFSET key used for zero function to make relative measurements
- Complete with built-in stand, protective holster, two Type K bead wire temperature probes and batteries.
EA10-NIST: EasyView™ Dual Input Thermometers
Original price was: ₦97,000.00.₦93,400.00Current price is: ₦93,400.00. -
-42%
Pinless Moisture Meter
Take pinless, non invasive moisture measurements on wood and building materials without damaging the surface with Extech’s MO57 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. It is easy to operate with display icons that indicate the levels of moisture content plus an audible alert feature. The MO57 can be ideal forrestoration projects and applications where moisture detection on floors, tiles, and under carpets is critical. A must-have tool for analyzing the after effects of water leakage in walls, ceilings, and also on non flat surfaces.
Extech MO57
Original price was: ₦176,500.00.₦103,000.00Current price is: ₦103,000.00. -
-2%
Features:
- Compatible with DO700 – 9-in-1 Portable Dissolved Oxygen Meter
DO705: Dissolved Oxygen Electrode
Original price was: ₦107,800.00.₦105,600.00Current price is: ₦105,600.00. -
-18%
pH/mV/Temperature Electrode
The Extech PH305 is an electrode capable of measuring pH, mV and temperature. For use with the PH300 Waterproof pH/mV/Temperature Kit, EC600 Waterproof Conductivity Kit, and DO700 Portable Dissolved Oxygen Meter. Comes with a 6 month warranty.
Extech PH305
Original price was: ₦135,000.00.₦111,000.00Current price is: ₦111,000.00. -
-3%
Features:
- Dual input thermometer accepts Types J, K, E, T, R, S, and N thermocouples
- Built-in datalogger stores up to 8800 data sets
- RS-232 port to transfer data to PC for analysis (PC software and cable included)
- Compact and rugged design features large backlit display
- Displays [T1 plus T2] or [T1-T2 plus T1] or [T1-T2 plus T2]
- Timer function displays elapsed time plus the time when MIN and MAX readings are taken
- Records Max/Min readings for later recall
- Includes Windows® compatible software and data cable
- Complete with built-in stand, protective holster, two Type K bead wire temperature probes and batteries.
EA15: EasyView™ Dual Input Temperature Datalogger
Original price was: ₦120,000.00.₦116,600.00Current price is: ₦116,600.00. -
-35%
20 Replacement Pins for MO290-HP probe
The Extech MO290-PINS-HP is a pack of spare or replacement pins for the MO290-HP Moisture Hammer Probe. Product includes 20 4 cm (1.6 in) long pins. Two locking nuts are also included to secure pins to the probe.
Extech MO290-PINS-HP
Original price was: ₦185,400.00.₦120,000.00Current price is: ₦120,000.00.
Smarttools
